Security engineer reviewing MSP tooling on a laptop in a server room

MSP security checklist

MSP Security Checklist: 151 Controls in 18 Areas

The controls we test in every MSP security audit, grouped by area and severity, so your team can see the standard before the audit starts.

25+ yearsIT & cybersecurity experience
Certified expertsCISSP · C|CISO · Microsoft · Cisco
Southern CaliforniaLocal and on-site, based in Irvine
NationwideRemote audits & advisory

How to use this checklist

The standard we audit managed service providers against

This checklist lists every control in our MSP Security Audit: 151 controls in 18 areas, each with its severity. Severity reflects how far a missing control could spread, which is why controls that apply to every client, such as help-desk verification or the credential platform, are rated Critical.

Use it to prepare for an audit, to brief leadership, or to plan the next quarter. When you want the controls tested against your records, with a score, a risk register and a roadmap, book the full MSP Security Audit.

  • 18 areas, 151 controls, 4 severity levels
  • Mapped to CIS v8.1, NIST CSF 2.0, ISO/IEC 27001 and SOC 2
  • Every control tested in the full audit
IT engineer with a tablet in a server room
21Critical controls that can turn one failure into a multi-client incident

Start here

The Critical controls

These are the controls we see missing most often with the widest reach. Close these first.

  • GRC-07 Client contracts define shared security responsibilities, services in and out of scope, and incident notification terms
  • WRK-05 Technician offboarding: same-day removal of every access path, rotation of secrets the person knew, device return, evidenced checklist
  • IAM-02 MFA on every staff account with no exceptions; phishing-resistant MFA (FIDO2/passkeys/certificates) for administrators and tool consoles
  • CRD-01 One approved documentation/password platform holds every client credential; spreadsheets, tickets, chat and notes are prohibited and checked
  • CRD-02 Credential platform hardened: SSO and MFA enforced, IP allow-listing where supported, per-client role-based access, audit logging on and reviewed
  • CRD-04 Credential rotation triggers and schedule (staff departure, suspected exposure, vendor breach, periodic for privileged accounts) with evidence of rotation
  • RMM-02 RMM and remote-control console access: SSO with phishing-resistant MFA, IP allow-list or VPN, per-client role-based access, no shared accounts, session timeout
  • RMM-03 RMM platform and remote-access servers patched within days of release; on-premises consoles isolated and not directly internet-exposed; vendor advisories and the CISA KEV catalog tracked
  • CLA-01 Microsoft CSP access through granular delegated admin privileges (GDAP) only: least-privilege roles, time-bound relationships, assigned to security groups, reviewed; no legacy DAP
  • CLA-02 Dedicated, named, MFA-protected administrative accounts per client; no credential reuse across clients
  • INF-02 EDR or MDR on 100% of MSP endpoints and servers with 24×7 response and tamper protection
  • IRP-01 Written incident response plan with roles, severity matrix and contact tree (offline copy), reviewed annually
  • BCP-02 3-2-1-1-0 design: off-site plus immutable or offline copy; backup consoles use separate credentials and MFA; backup administration isolated from domain administration
  • BCP-04 Scheduled test restores (file, server, full recovery) per client with recorded results; failed backup jobs actioned daily
  • VPM-01 Patch policy with service levels by severity (KEV and critical within 48-72 hours, high within 14 days, others within 30 days) across OS, third-party software, firmware, hypervisors and network devices, with documented exceptions
  • NET-02 Firewall administration: management plane restricted, MFA, unique accounts, current firmware, default credentials removed, administrative access logged
  • NET-03 Client remote access: VPN or ZTNA with MFA or SSO and device posture checks; no internet-exposed RDP or SMB; split-tunnel decisions documented
  • CLD-01 Standard identity baseline applied to every client Microsoft 365 or Google Workspace tenant: MFA for all users, conditional access, legacy authentication blocked, admin roles minimized, Secure Score tracked
  • CLD-03 Client endpoint protection standard: EDR or MDR on every endpoint, disk encryption, local administrator removal, application control where feasible
  • CLD-05 Help-desk identity verification before password resets, MFA resets and access changes (callback to known numbers, verification codes, manager approval); no resets from unverified email or chat
  • SOC-02 Analyst access controls: multi-tenant segregation in SIEM and XDR, per-client role-based access, MFA, analyst actions logged

The full checklist

All 151 controls by area

Open an area to see its controls. Severity is shown after each control.

01. Governance, Risk and Compliance · 9 controls
  • GRC-01 Accountable security program owner and charter (High)
  • GRC-02 Approved written security policy set, reviewed annually and acknowledged by staff (High)
  • GRC-03 Formal risk assessment and maintained risk register covering multi-client (supply-chain) risk (High)
  • GRC-04 Inventory of regulatory and contractual obligations by client (HIPAA business associate agreements, FTC Safeguards Rule, PCI DSS, state privacy laws and contract flow-downs) (Medium)
  • GRC-05 Independent assurance (SOC 2, ISO 27001, MSP Verify, Cyber Essentials Plus, penetration test) with tracked remediation (Medium)
  • GRC-06 Cyber liability and technology errors-and-omissions insurance covering client-impacting incidents (Medium)
  • GRC-07 Client contracts define shared security responsibilities, services in and out of scope, and incident notification terms (Critical)
  • GRC-08 Security metrics reported to leadership and periodic internal control self-assessment (Low)
  • GRC-09 Data classification and handling standard that covers client data (Medium)
02. Workforce Security and Insider Risk · 9 controls
  • WRK-01 Pre-employment background screening for staff and subcontractors with client access (High)
  • WRK-02 Signed confidentiality, acceptable-use and code-of-conduct agreements (Medium)
  • WRK-03 Security awareness training at hire and annually, phishing simulation, and role-based training for technicians (High)
  • WRK-04 Technician onboarding: access granted by role through a documented request and approval, least privilege (High)
  • WRK-05 Technician offboarding: same-day removal of every access path, rotation of secrets the person knew, device return, evidenced checklist (Critical)
  • WRK-06 Role changes and quarterly recertification of who can reach which client (High)
  • WRK-07 Separation of duties and dual control for high-risk actions (mass scripts, backup deletion, credential export, billing) (Medium)
  • WRK-08 Remote and hybrid work security standard (no personal devices for client administration, home-network and privacy rules) (Medium)
  • WRK-09 Insider-risk monitoring of unusual privileged activity (bulk credential views, exports, after-hours access) (Medium)
03. Identity and Access Management (MSP Internal) · 9 controls
  • IAM-01 Central identity provider and single sign-on for every MSP tool (RMM, PSA, documentation, backup, email, SIEM) (High)
  • IAM-02 MFA on every staff account with no exceptions; phishing-resistant MFA (FIDO2/passkeys/certificates) for administrators and tool consoles (Critical)
  • IAM-03 Separate administrative accounts and a tiered administration model; no admin rights on daily-use accounts (High)
  • IAM-04 Password standard enforced through a staff password manager, no reuse, breached-password screening (Medium)
  • IAM-05 Conditional access and risk-based sign-in policies on the MSP tenant (legacy authentication blocked, device compliance, named locations for consoles) (High)
  • IAM-06 Service accounts and API keys inventoried, owned, least-privileged, rotated and stored in a vault; no interactive logon (High)
  • IAM-07 Privileged access management: just-in-time elevation, approval and session logging for the highest privileges (High)
  • IAM-08 Quarterly access reviews of MSP tool roles; dormant accounts removed within 30 days (Medium)
  • IAM-09 Break-glass accounts exist, are stored offline, excluded from conditional access with compensating alerts, and tested (Medium)
04. Client Credential and Secrets Management · 9 controls
  • CRD-01 One approved documentation/password platform holds every client credential; spreadsheets, tickets, chat and notes are prohibited and checked (Critical)
  • CRD-02 Credential platform hardened: SSO and MFA enforced, IP allow-listing where supported, per-client role-based access, audit logging on and reviewed (Critical)
  • CRD-03 Least-privilege visibility: technicians see only the clients and credential classes they support; domain admin, firewall, backup and financial credentials restricted further (High)
  • CRD-04 Credential rotation triggers and schedule (staff departure, suspected exposure, vendor breach, periodic for privileged accounts) with evidence of rotation (Critical)
  • CRD-05 No shared or generic administrative accounts; where unavoidable, each use is checked out, attributed and rotated (High)
  • CRD-06 Secure transmission of credentials to clients and vendors (one-time secret links, never email, SMS or ticket text) (Medium)
  • CRD-07 Credential platform exports and backups restricted, encrypted and logged; an offline recovery copy exists; the vendor's own security reviewed (High)
  • CRD-08 Encryption keys, BitLocker recovery keys, backup passphrases, MFA seeds, certificates and firmware keys handled as restricted secrets (High)
  • CRD-09 Client documentation (admin accounts, network diagrams, asset lists) complete, accurate and reviewed on a defined cadence; stale credentials removed (Medium)
05. Remote Monitoring, Management and Remote Access Tooling · 9 controls
  • RMM-01 Single approved RMM and remote-control tool set; unauthorized remote tools detected and blocked on client endpoints (High)
  • RMM-02 RMM and remote-control console access: SSO with phishing-resistant MFA, IP allow-list or VPN, per-client role-based access, no shared accounts, session timeout (Critical)
  • RMM-03 RMM platform and remote-access servers patched within days of release; on-premises consoles isolated and not directly internet-exposed; vendor advisories and the CISA KEV catalog tracked (Critical)
  • RMM-04 Script and automation governance: review and approval, change control, signing where possible, second approval for mass deployment, least-privilege execution (High)
  • RMM-05 RMM agent configuration: minimal privileges and features, tamper protection, per-client segmentation inside the platform (Medium)
  • RMM-06 Logging and alerting on RMM activity (logins, new users, policy changes, mass script runs, new agents) forwarded to a SIEM and retained at least 12 months (High)
  • RMM-07 Remote support sessions: client consent and visibility, session logs or recordings, technician identity shown, no unattended access beyond need (Medium)
  • RMM-08 Hardened technician administration workstations (privileged access workstation model): EDR, current OS, disk encryption, no browsing or email in the admin tier, client administration only from managed devices (High)
  • RMM-09 RMM and remote-tool vendor security posture reviewed annually (SOC 2 report, vulnerability disclosure, incident history) and breach-notification contacts registered (Medium)
06. Privileged Access to Client Environments · 9 controls
  • CLA-01 Microsoft CSP access through granular delegated admin privileges (GDAP) only: least-privilege roles, time-bound relationships, assigned to security groups, reviewed; no legacy DAP (Critical)
  • CLA-02 Dedicated, named, MFA-protected administrative accounts per client; no credential reuse across clients (Critical)
  • CLA-03 Client firewall and network-device administration through unique accounts or central authentication (RADIUS/TACACS+), management plane limited to MSP sources, no WAN-exposed administration (High)
  • CLA-04 Delegated access to other client cloud and SaaS consoles (Google Workspace, AWS, Azure Lighthouse, Meraki, UniFi, backup portals) through named accounts, MFA and least privilege (High)
  • CLA-05 Record of MSP access for each client (accounts, roles, holders) maintained, shared with the client and revocable by the client (High)
  • CLA-06 Just-in-time, approval-based elevation for domain admin and global admin tasks; standing global administrator access minimized (High)
  • CLA-07 Every MSP action in a client environment is logged and attributable to an individual; logs available to the client on request (High)
  • CLA-08 Client break-glass credentials documented, held securely and not shared, with the client's agreement (Medium)
  • CLA-09 Connections between client networks and the MSP (VPNs, site-to-site tunnels, management networks) reviewed; no transitive path between clients; client data sets segregated (High)
07. MSP Internal Infrastructure and Endpoint Security · 10 controls
  • INF-01 Inventory of MSP systems and devices with owners and secure disposal (Medium)
  • INF-02 EDR or MDR on 100% of MSP endpoints and servers with 24×7 response and tamper protection (Critical)
  • INF-03 Hardened build baseline (CIS Benchmark) for MSP workstations and servers: local admin removed, LAPS, disk encryption, removable-media control (High)
  • INF-04 Patch management for the MSP's own systems (OS, browsers, third-party applications, firmware) with KEV items within 48 hours and measured compliance (High)
  • INF-05 MSP network security: current firewall firmware, segmentation (tool servers, technician VLAN, guest, IoT), egress and DNS filtering (High)
  • INF-06 MSP email security: SPF, DKIM and DMARC at p=reject, anti-impersonation, external tagging, link and attachment sandboxing (High)
  • INF-07 Mobile devices with access to MSP data enrolled in MDM with PIN, encryption, remote wipe and app protection (Medium)
  • INF-08 MSP's own Microsoft 365 or Google Workspace tenant hardened to a benchmark (conditional access, no legacy authentication, admin auditing, Secure Score tracked) (High)
  • INF-09 Monthly vulnerability scanning of MSP infrastructure and an annual penetration test including the RMM and remote-access surface; findings tracked to closure (High)
  • INF-10 Wireless and wired access control at MSP offices (802.1X or WPA3-Enterprise, guest isolation) (Low)
08. Logging, Monitoring, Detection and Response · 8 controls
  • DET-01 Centralized log collection (SIEM) for MSP identity, RMM, PSA, documentation platform, backup, firewall and EDR with at least 12 months retention (High)
  • DET-02 Detection content for MSP-specific threats (new RMM administrator, mass script execution, bulk credential views or exports, console sign-ins from new locations, GDAP changes, backup deletion) (High)
  • DET-03 24×7 monitoring and response capability (in-house SOC or MDR) with documented escalation and response times (High)
  • DET-04 Alert triage, tuning and performance metrics (time to detect and respond) reviewed regularly (Medium)
  • DET-05 Threat intelligence and vendor advisory monitoring (CISA KEV, RMM and firewall vendor bulletins) with a documented response to critical advisories (Medium)
  • DET-06 Client-facing monitoring as contracted: logging on managed client systems, client visibility into MSP presence and activity, canary accounts (Medium)
  • DET-07 Log integrity: logs write-protected, segregated from production administration, time-synchronized (Medium)
  • DET-08 Regular threat hunting and proactive review of privileged activity across tools and client tenants (Low)
09. Incident Response and Breach Notification · 8 controls
  • IRP-01 Written incident response plan with roles, severity matrix and contact tree (offline copy), reviewed annually (Critical)
  • IRP-02 Playbooks for MSP-compromise scenarios (RMM takeover, credential platform breach, technician account takeover, vendor breach, ransomware across several clients) including isolate-and-rotate-everything steps (High)
  • IRP-03 Client notification procedure with contractual timelines, template communications and knowledge of regulatory notification duties (High)
  • IRP-04 Annual tabletop exercise including a multi-client scenario, with lessons learned tracked to closure (High)
  • IRP-05 Forensic readiness: evidence preservation, incident response retainer, cyber insurer notification steps, law enforcement contacts (Medium)
  • IRP-06 Out-of-band communications and crisis management when email or collaboration tools are compromised (Medium)
  • IRP-07 Post-incident review, root-cause analysis and tracking of corrective actions (Medium)
  • IRP-08 Client incident handling service: how client incidents are detected, triaged, escalated and reported back (Medium)
10. Backup, Disaster Recovery and Business Continuity · 9 controls
  • BCP-01 Documented backup standard for client workloads including SaaS (Microsoft 365, Google Workspace) with agreed scope, frequency, RPO and RTO per client (High)
  • BCP-02 3-2-1-1-0 design: off-site plus immutable or offline copy; backup consoles use separate credentials and MFA; backup administration isolated from domain administration (Critical)
  • BCP-03 Backups encrypted with separately managed keys; retention policy documented and meets client and regulatory needs; legal-hold capability (High)
  • BCP-04 Scheduled test restores (file, server, full recovery) per client with recorded results; failed backup jobs actioned daily (Critical)
  • BCP-05 Backup monitoring and reporting to clients with coverage gaps tracked (Medium)
  • BCP-06 Ransomware-resilient backup protections: deletion protection and soft delete, MFA for delete, alerts on retention changes, isolated backup network (High)
  • BCP-07 MSP's own continuity and disaster recovery: backups of RMM, PSA, documentation, SIEM and finance systems, alternative tooling and communications, recovery objectives tested annually (High)
  • BCP-08 Configuration backups of client network devices (firewalls, switches, wireless) stored securely and versioned (Medium)
  • BCP-09 Retention and secure deletion of expired backups and of client data after offboarding (Medium)
11. Vulnerability, Patch and Configuration Management for Clients · 7 controls
  • VPM-01 Patch policy with service levels by severity (KEV and critical within 48-72 hours, high within 14 days, others within 30 days) across OS, third-party software, firmware, hypervisors and network devices, with documented exceptions (Critical)
  • VPM-02 Patch compliance measured and reported per client with failures remediated (High)
  • VPM-03 Authenticated internal and external vulnerability scanning of client environments at an agreed cadence with risk-based remediation tracking (High)
  • VPM-04 Secure configuration baselines (CIS Benchmarks) for client servers, workstations, Microsoft 365 and firewalls, with drift detection (High)
  • VPM-05 End-of-life software and hardware inventory with replacement plans communicated to clients (Medium)
  • VPM-06 Firmware and driver updates for firewalls, switches, access points, hypervisors, storage and UPS tracked against vendor advisories (High)
  • VPM-07 Pilot rings, rollback plans and change records for patch deployment (Medium)
12. Network and Perimeter Services Delivered to Clients · 9 controls
  • NET-01 Firewall management standard: default deny, no any-any rules, documented rule justification and owner, periodic rule review, logging enabled (High)
  • NET-02 Firewall administration: management plane restricted, MFA, unique accounts, current firmware, default credentials removed, administrative access logged (Critical)
  • NET-03 Client remote access: VPN or ZTNA with MFA or SSO and device posture checks; no internet-exposed RDP or SMB; split-tunnel decisions documented (Critical)
  • NET-04 Network segmentation implemented for client networks (servers, users, guest, IoT, OT, management VLAN) (High)
  • NET-05 Secure switching and wireless: default credentials removed, SNMPv3, management VLAN, WPA3 or 802.1X, guest isolation (Medium)
  • NET-06 Public DNS and domain registrar security: registrar MFA and transfer lock, DNSSEC where feasible, record inventory, dangling records removed, SPF, DKIM and DMARC on every client domain (High)
  • NET-07 Inventory of client internet-facing services, websites and portals; TLS and certificate monitoring; hardening or WAF; no unnecessary exposure; regular external scan (High)
  • NET-08 Change management for client network changes: ticketed, approved, tested, rollback plan, client informed (Medium)
  • NET-09 Monitoring and alerting for managed networks (device down, configuration change, new device) (Medium)
13. Identity, Email, Endpoint and Cloud Baseline for Clients · 8 controls
  • CLD-01 Standard identity baseline applied to every client Microsoft 365 or Google Workspace tenant: MFA for all users, conditional access, legacy authentication blocked, admin roles minimized, Secure Score tracked (Critical)
  • CLD-02 Client email security baseline: SPF, DKIM and DMARC enforcement, anti-phishing and impersonation protection, link and attachment scanning, external tagging, forwarding-rule controls, audit logging on (High)
  • CLD-03 Client endpoint protection standard: EDR or MDR on every endpoint, disk encryption, local administrator removal, application control where feasible (Critical)
  • CLD-04 Client user lifecycle (joiner, mover, leaver) with service levels (disable within 24 hours), license and shared-mailbox handling, request verification (High)
  • CLD-05 Help-desk identity verification before password resets, MFA resets and access changes (callback to known numbers, verification codes, manager approval); no resets from unverified email or chat (Critical)
  • CLD-06 Security awareness training and phishing simulation delivered or offered to clients with reporting (Medium)
  • CLD-07 Client data protection services as contracted (DLP, sensitivity labels, encryption) and governance of OAuth application consent in client tenants (Medium)
  • CLD-08 Client security posture reporting (monthly or quarterly) with open risks, exceptions and client-signed risk acceptance (Medium)
14. Third-Party, Vendor and Supply-Chain Risk · 8 controls
  • VND-01 Vendor inventory (RMM, PSA, documentation, backup, EDR, email security, SOC/MDR, distributors, contractors) with data-access classification and criticality (High)
  • VND-02 Security due diligence before onboarding and annually (SOC 2 or ISO reports, penetration tests, breach history, financial viability) (High)
  • VND-03 Contractual security clauses with vendors: breach notification timelines, data handling, sub-processor lists, right to audit, exit and data return (Medium)
  • VND-04 Subcontractors, offshore help desks and white-label SOC providers held to the same controls (screening, MFA, named accounts, access limited to assigned clients, NDA) and disclosed to clients (High)
  • VND-05 Software supply chain: approved software list, integrity verification of installers and agents, updates from vendor-signed sources only, tool-to-tool integrations and API keys inventoried (High)
  • VND-06 Vendor access to MSP systems (support representatives, integrators) controlled, time-bound and logged (Medium)
  • VND-07 Concentration risk and exit plans for critical vendors (RMM outage or breach contingency) (Medium)
  • VND-08 Vendor breach response: advisories monitored, playbook executed (rotate keys, verify agents) with evidence (High)
15. Data Protection and Privacy · 8 controls
  • DAT-01 Inventory of client data held by the MSP (backups, ticket attachments, documentation, logs, mailbox exports) and its locations, regions and vendors (High)
  • DAT-02 Encryption at rest and in transit for all client data with managed keys (High)
  • DAT-03 Technician data-handling rules: no client data on personal devices or personal cloud, no copying into tickets or chat, approved transfer tools only (High)
  • DAT-04 Retention and secure disposal schedule, media sanitization to NIST SP 800-88, certificates of destruction, devices wiped before reuse or resale (Medium)
  • DAT-05 Privacy and regulatory obligations met: HIPAA business associate agreements, data processing agreements, data residency, state privacy laws (Medium)
  • DAT-06 Data loss prevention and monitoring on MSP channels (email, SharePoint, Teams, removable media) for client-data leakage (Medium)
  • DAT-07 Generative-AI and productivity-tool data policy: no client secrets or data in unapproved AI tools; approved tools configured not to train on client data (Medium)
  • DAT-08 Secure scripting and development practices for MSP-built automation handling client data (no hard-coded secrets, code review, private repositories) (Medium)
16. Service Delivery, Client Lifecycle and Change Management · 9 controls
  • SVC-01 Client onboarding security checklist: asset discovery, takeover and rotation of administrative credentials, removal of the previous provider's access, baseline hardening, backup verification, documentation created (High)
  • SVC-02 Client offboarding procedure: hand-over of credentials and documentation, removal of all MSP access, agents and delegated relationships, return or deletion of data with certificate, client sign-off (High)
  • SVC-03 Service catalog and contracts state which security services are included and excluded; a minimum security baseline clients must accept or formally decline (High)
  • SVC-04 Change management for client environments: request, risk assessment, approval for high-risk changes, emergency path, client communication, records (High)
  • SVC-05 Ticketing and PSA security: client data in tickets minimized, attachments scanned, role-based access, client portal MFA (Medium)
  • SVC-06 Service levels for security tickets (compromise, lost device, departed user) with priority definitions and measured performance (Medium)
  • SVC-07 Per-client runbooks, network diagrams and asset lists kept current and reviewed at least annually (Medium)
  • SVC-08 Client risk-acceptance and exception register: declined recommendations recorded, signed and re-presented periodically (Medium)
  • SVC-09 Standard operating procedures for routine privileged tasks (new user, firewall change, restore, administrator password reset) with security steps embedded (Medium)
17. Physical and Environmental Security · 5 controls
  • PHY-01 Office and operations-room physical access control (badges or keys, visitor log and escort), server and tool rooms locked (Medium)
  • PHY-02 Clean-desk and screen-lock rules; no client credentials on paper or whiteboards (Low)
  • PHY-03 Client devices and media in MSP custody (repairs, spares, firewalls with configurations) stored locked with chain of custody and wiped before return or disposal (Medium)
  • PHY-04 Environmental protection and resilience for on-premises MSP infrastructure (UPS, fire, cooling) or evidence of resilient cloud hosting (Low)
  • PHY-05 Remote-worker physical security (equipment security, theft and loss reporting) (Low)
18. Managed Security Services and SOC Operations (MSSP) · 8 controls
  • SOC-01 Documented detection and response service scope, response times by severity, coverage hours and escalation paths per client (High)
  • SOC-02 Analyst access controls: multi-tenant segregation in SIEM and XDR, per-client role-based access, MFA, analyst actions logged (Critical)
  • SOC-03 Detection engineering lifecycle: rule development, testing, MITRE ATT&CK coverage mapping, tuning records (High)
  • SOC-04 Threat intelligence and vulnerability advisories integrated into detections and client notifications (Medium)
  • SOC-05 Client log data handling: collection scope agreed, retention per contract, encryption, deletion on exit, data residency (High)
  • SOC-06 Response authority matrix: pre-authorized containment actions per client (isolate host, disable account) documented and signed (High)
  • SOC-07 Quality assurance: case reviews, false-positive and false-negative metrics, attack simulation to validate detections (Medium)
  • SOC-08 Client reporting: monthly security reports and incident reports with timeline and root cause (Medium)

A checklist is a starting point. In the audit we test each control against your documents, settings and records, rate it Pass, Partial or Fail, and turn every gap into a finding with the fix, a risk and a deadline. See how the results are reported.

Ali Hassani, CISO and CISSP, founder of OC Security Audit

Who leads the audit

Led by Ali Hassani, CISO

Certified CISO (C|CISO) and CISSP with 25+ years in IT, cybersecurity, compliance and infrastructure, and dozens of Microsoft and Cisco certifications, including MCSE, MCITP, MCSA Security, CCNP and CCNA.

Every MSP security audit is planned, performed and signed by Ali, not handed to a junior analyst. We stay independent: we assess and advise, and your team carries out the fixes, with our help if you want it.

Questions and answers

MSP security checklist questions

What is an MSP security checklist?

It is the list of security controls a managed service provider should have in place to protect itself and the clients it can reach: governance, workforce, identity, client credentials, remote management, privileged access to clients, detection, incident response, backup, patching, network services, the client baseline, vendors, data, service delivery, physical security and MSSP operations.

Is this the same list used in the audit?

Yes. These are the 151 controls tested in our MSP Security Audit. In the audit each one is rated Pass, Partial or Fail with evidence, and every gap becomes a finding with a fix and a link to a business risk.

Can we use the checklist for a self-assessment?

Yes. Working through it with your team is a useful start, and it shows where you are likely to have gaps. A self-assessment does not replace independent testing of records, which is where most procedural gaps are found.

Which controls should an MSP fix first?

The Critical controls, because each one, if missing, can turn a single failure at the provider into an incident at many clients. They include technician offboarding, MFA for every staff account, the credential platform, RMM console access and patching, GDAP-only delegated access, help-desk verification, backup design and restore testing.

Where do the controls come from?

They follow the joint advisory on threats to managed service providers (AA22-131A) and map to CIS Controls v8.1, NIST CSF 2.0, ISO/IEC 27001:2022 and the SOC 2 Trust Services Criteria.

How much does the full audit cost?

The MSP Security Audit starts at $3,500 for one provider and tests every control on this page.

ocsa grc hero risk leader r

Have every control tested, not just ticked

The MSP Security Audit tests all 151 controls read-only and delivers a score, a risk register and a roadmap.

Or call 949-777-5567