Security engineer with a laptop in a server room during a firewall review
PAN-OS lifecycle

PAN-OS End-of-Life and Vulnerability Review

Is each firewall on a supported PAN-OS release, patched for the flaws attackers are using, and receiving threat updates every day?

Security team reviewing firewall dashboards in a monitoring room
Known exploited

16 Palo Alto vulnerabilities are on CISA’s exploited list

As of October 30, 2026, 13 are in PAN-OS and three were added in 2026. We match your exact release and enabled features against each one.

Network engineer in a blazer reviewing firewall configuration beside a server rack
Plan ahead

PAN-OS 11.1 and 11.2 leave standard support in May 2027

We show which firewalls need an upgrade plan and which hardware is past end of sale.

25+ yearsIT & cybersecurity experience
Certified expertsCISSP · C|CISO · Microsoft · Cisco
Southern CaliforniaLocal and on-site, based in Irvine
NationwideRemote audits & advisory
PAN-OS lifecycle

What the PAN-OS lifecycle and vulnerability review covers

A firewall can have a clean rule base and still be the easiest way into the network if its PAN-OS release is old. Palo Alto Networks publishes fixes as maintenance and hotfix releases, and attackers move quickly once a flaw in the management interface or GlobalProtect is public.

We read each firewall’s model, PAN-OS release, content versions, licenses and certificates, then compare them with Palo Alto Networks’ end-of-life dates, its security advisories and CISA’s Known Exploited Vulnerabilities catalog: 14 controls, each with evidence.

Analyst reviewing blocked access attempts on security monitors
The controls

14 PAN-OS platform & lifecycle controls we evaluate

Each control ends as Pass, Fail, Warning or Manual review, with the evidence behind it. Some checks raise or lower the default severity to match what was found.

IDControlDefault severity
PL-01PAN-OS release is still supported by the vendorLow
PL-02No known-exploited vulnerability applies to the installed PAN-OS releaseCritical
PL-03No unpatched Critical or High vendor advisory applies to the installed PAN-OS releaseHigh
PL-04Application and threat content is currentMedium
PL-05Antivirus content is currentHigh
PL-06WildFire signatures are currentMedium
PL-07URL filtering database is currentMedium
PL-08Threat Prevention subscription is activeHigh
PL-09URL Filtering subscription is activeHigh
PL-10WildFire subscription is activeMedium
PL-11Hardware support entitlement is activeMedium
PL-13DNS Security subscription is active when DNS Security is configuredMedium
PL-12Device certificate is installed for cloud-delivered servicesLow
PL-14Dynamic content updates are scheduled to install automaticallyMedium
Why it matters

What we look for and why

01

Exploited flaws, matched to your release

A vulnerability matters only if your release and features are affected. We check the exact hotfix level and whether GlobalProtect, the Authentication Portal or the management interface is in use.

02

End of life is a date, not a guess

Standard support for PAN-OS 11.1 ends May 3, 2027 and for 11.2 on May 2, 2027. We list every firewall and Panorama with its release and support end date.

03

Daily threat content

Threat prevention is only as current as the last content update. We check the Applications and Threats, antivirus and WildFire versions and the schedules that keep them current.

Sample

A finding from the sample report

SAMPLE · Veltrana Logistics (fictional company) · illustrative data
Area
PAN-OS lifecycle
Finding
Vendor advisories with exploitation observed in the wild apply to the installed release
Severity
Critical
Evidence
VLT-HQ-FW01 runs PAN-OS 11.1.4-h7. Four vendor advisories for this release state that exploitation has been observed in the wild: CVE-2026-0257 (GlobalProtect), CVE-2026-0300 (Authentication Portal), and CVE-2025-0111 and CVE-2025-0108 (management web interface).
Fix
Upgrade to a PAN-OS release that contains the fixes listed in each advisory, as an emergency change. Where the vulnerable feature is exposed to the internet (management interface, GlobalProtect), restrict access first, then patch.

Every finding in the real report has this shape. See the full sample report

Support dates

PAN-OS end-of-life dates

Standard support ends first; extended support follows where Palo Alto Networks lists it. Checked November 1, 2026.

ReleaseReleasedEnd of standard supportExtended support ends
PAN-OS 12.2July 30, 2026July 30, 2029July 30, 2030
PAN-OS 12.1August 28, 2025August 28, 2028August 28, 2029
PAN-OS 11.2May 2, 2024May 2, 2027August 31, 2027
PAN-OS 11.1November 3, 2023May 3, 2027August 31, 2027
PAN-OS 11.0November 17, 2022November 17, 2024None listed
PAN-OS 10.2February 27, 2022August 27, 2025March 31, 2027
PAN-OS 10.1May 31, 2021December 1, 2024March 31, 2026

Source: Palo Alto Networks End-of-Life Summary. A release can stay supported longer on hardware for which it is the last supported version. PAN-OS 10.1 and every older release are now past end of life.

Known exploited

PAN-OS vulnerabilities on CISA’s exploited list, 2024–2026

Each was used in real attacks. Five of the nine involve the management interface; two involve GlobalProtect.

CVEWhat is affectedAdded to the list
CVE-2026-0322Management interface: authenticated remote code executionOctober 14, 2026
CVE-2026-0257GlobalProtect portal and gateway: authentication bypassMay 29, 2026
CVE-2026-0300User-ID Authentication Portal: buffer overflowMay 6, 2026
CVE-2025-0111Management web interface: authenticated file readFebruary 20, 2025
CVE-2025-0108Management web interface: authentication bypassFebruary 18, 2025
CVE-2024-3393DNS Security: crafted packet can reboot the firewallDecember 30, 2024
CVE-2024-9474Management web interface: privilege escalationNovember 18, 2024
CVE-2024-0012Management web interface: authentication bypassNovember 18, 2024
CVE-2024-3400GlobalProtect: OS command injectionApril 12, 2024

Source: CISA Known Exploited Vulnerabilities catalog, version 2026.10.30, and Palo Alto Networks security advisories. Four older PAN-OS entries (2017–2022) and three Expedition entries are also on the list.

How it works

A read-only audit in five steps

STEP 1

Scoping call

We confirm the firewalls, Panorama, sites, GlobalProtect and who on your side should be told before the run. 30 minutes.

STEP 2

Read-only access

Your administrator creates one Superuser (read-only) account on each firewall, or on Panorama if it manages them. That account is the only change, and your team makes it.

STEP 3

Read-only collection

The collector reads the configuration, rule hit counts and system status over HTTPS through the PAN-OS XML API, from a computer inside your network.

STEP 4

Review and scoring

141 controls in 13 areas are scored with evidence, including a review of the last 7 days of firewall logs. Ali reviews every finding, groups them into business risks and maps them to NIST CSF 2.0 and ISO/IEC 27001:2022.

STEP 5

Report and roadmap

Executive and technical reports, a rulebase review, a log review, a risk register, a roadmap and an Excel workbook, walked through on a call with your owner and your firewall administrator.

Read-only means read-only. The audit never commits, changes or deletes a setting, never installs software or content updates and never restarts a firewall. It is designed so your end users notice nothing.
Related

Where to go next

PAN-OS management interface security

Who can reach the web interface, SSH and API, and how administrators sign in.

GlobalProtect & IPsec VPN security

MFA, authentication override cookies and lockout for remote access.

This series

Page 3 of 13: PAN-OS end of life & vulnerabilities

Ali Hassani, CISO, OC Security Audit
CISO-led audit

Guided by Ali Hassani, CISO

Certified CISO (C|CISO) and CISSP with 25+ years in IT, cybersecurity, compliance and infrastructure, and dozens of Microsoft and Cisco certifications, including MCSE, MCITP, MCSA Security, CCNP and CCNA. Every Palo Alto audit is read-only, evidence-based and written so an owner and a firewall administrator can both act on it.

FAQ

Questions IT leaders ask

Do you scan our firewall for vulnerabilities?

No. We read the PAN-OS release and which features are enabled, then match them against Palo Alto Networks’ advisories and CISA’s catalog. Nothing is sent to the firewall that could test or trigger a flaw.

We are on PAN-OS 10.2. Is that a problem?

PAN-OS 10.2 left standard support on August 27, 2025, and Palo Alto Networks lists its extended support until March 31, 2027. Plan the upgrade now; the report lists each firewall’s current release.

Do you check our licenses?

We report which subscriptions are active and whether they are in use. A missing subscription is listed as a licensing check for you to decide on; we never buy or activate anything.

What about Panorama?

Panorama must run the same or a later PAN-OS release than the firewalls it manages. We check its release, its support status and the versions it manages.

Will anyone notice the audit?

End users should not notice anything. Your firewall administrators and your SIEM will see logins by the audit account in the System log. We tell your IT or security contact the date, time, account and computer in advance.

Optional implementation help

OC Security Audit only audits, read-only. If you want hands-on help, IT Perfection, a managed IT business also owned by Ali Hassani, can implement the fixes and support ongoing firewall and VPN management. Using it is optional.

IT Perfection managed firewall & VPN
Manager with a laptop and his team in an office

Know what your firewall really allows, before an attacker tests it

Schedule a consultation. We scope the Palo Alto firewall audit in 30 minutes and quote one fixed price.

Read-only audit. No changes to your firewalls. Irvine, Orange County and Southern California on-site; remote nationwide.