What the management interface review covers
The management plane is the firewall’s control room: the web interface, SSH, the XML and REST APIs, SNMP and the administrator accounts that use them. When it is reachable from the internet, or protected by one shared password, every other control on the firewall depends on an attacker not finding it.
We check every path to the management plane, including management profiles on data interfaces, then the administrator accounts, roles, sign-in methods, lockout, session timeouts and API keys: 29 controls, each with evidence.

29 Management access & administrator controls we evaluate
Each control ends as Pass, Fail, Warning or Manual review, with the evidence behind it. Some checks raise or lower the default severity to match what was found.
Management Access · 22 controls
| ID | Control | Default severity |
|---|---|---|
| MA-01 | Clear-text management protocols (HTTP, Telnet) are disabled on interfaces | High |
| MA-02 | Administrative access is not offered on internet-facing interfaces | Critical |
| MA-03 | Interface management profiles list the permitted administrator addresses | Medium |
| MA-04 | HTTP and Telnet are disabled on the dedicated management interface | High |
| MA-05 | Management interface restricts source addresses (permitted IP list) | Medium |
| MA-06 | Administrator sessions time out after 15 minutes or less | Medium |
| MA-07 | Administrator account lockout limits password guessing | Medium |
| MA-08 | Local administrator passwords must meet a complexity policy | Medium |
| MA-09 | API keys expire (key lifetime is set) | Medium |
| MA-10 | A legal login banner is displayed | Low |
| MA-11 | SNMP uses version 3 or is not enabled | High |
| MA-12 | Management web interface uses a TLS service profile and certificate you control | Medium |
| MA-13 | SSL/TLS service profiles require TLS 1.2 or later | Medium |
| MA-14 | Configuration commit lock is acquired automatically | Low |
| MA-15 | A log entry is written when the data plane is heavily loaded | Low |
| MA-16 | Two time servers (NTP) are configured | Medium |
| MA-17 | The firewall is synchronized to its time source | Medium |
| MA-18 | NTP uses authentication | Low |
| MA-19 | Two DNS servers are configured for the firewall | Low |
| MA-20 | The management web certificate is valid and trusted | Medium |
| MA-21 | Certificates stored on the firewall are valid and not close to expiry | High |
| MA-22 | Update server identity is verified | Low |
Administrator Accounts · 7 controls
| ID | Control | Default severity |
|---|---|---|
| AA-01 | The default “admin” account is renamed or removed | Medium |
| AA-02 | Few accounts hold the Superuser role | Medium |
| AA-03 | Administrators sign in through central authentication | Medium |
| AA-04 | Administrator sign-in requires multifactor authentication | High |
| AA-05 | Service and shared accounts do not hold the Superuser role | Medium |
| AA-06 | Roles follow least privilege (not all administrators are Superuser) | Medium |
| AA-07 | Local accounts have a password profile (expiry) | Low |
What we look for and why
Management reachable from untrusted networks
An HTTPS or SSH management profile on an internet-facing interface puts the firewall’s own login page on the internet. We list every interface, zone and profile that allows it.
Shared and local-only admin accounts
A shared admin login with no MFA cannot be traced or revoked per person. We list each administrator, role and sign-in method, and flag accounts that bypass central authentication.
API keys and quiet ways in
API keys that never expire, SNMP community strings and Telnet or HTTP access are easy to forget. We check key lifetime, SNMP version and every enabled management service.
A finding from the sample report
- Area
- Administrator accounts
- Finding
- One administrator signs in without multifactor authentication enforced on the firewall
- Severity
- High
- Evidence
- Administrator kpatel signs in through the RADIUS-Admins authentication profile, which does not enable multifactor authentication on the firewall. A second factor may be enforced by the RADIUS server; it could not be confirmed from the configuration, so the control is rated Warning.
- Fix
- Require multifactor authentication for every administrator: SAML with your identity provider, RADIUS with push or one-time codes, or the firewall’s own multifactor authentication profile.
Every finding in the real report has this shape. See the full sample report
A read-only audit in five steps
Scoping call
We confirm the firewalls, Panorama, sites, GlobalProtect and who on your side should be told before the run. 30 minutes.
Read-only access
Your administrator creates one Superuser (read-only) account on each firewall, or on Panorama if it manages them. That account is the only change, and your team makes it.
Read-only collection
The collector reads the configuration, rule hit counts and system status over HTTPS through the PAN-OS XML API, from a computer inside your network.
Review and scoring
141 controls in 13 areas are scored with evidence, including a review of the last 7 days of firewall logs. Ali reviews every finding, groups them into business risks and maps them to NIST CSF 2.0 and ISO/IEC 27001:2022.
Report and roadmap
Executive and technical reports, a rulebase review, a log review, a risk register, a roadmap and an Excel workbook, walked through on a call with your owner and your firewall administrator.
Where to go next
PAN-OS end of life & vulnerabilities
Versions affected by actively exploited flaws, end-of-life releases and content updates.
Zone protection & exposed services
Authentication Portal, response pages and User-ID on internet-facing interfaces.
Page 2 of 13: PAN-OS management interface security
- 1. Palo Alto Firewall Security Audit (hub)
- 2. PAN-OS management interface security (this page)
- 3. PAN-OS end of life & vulnerabilities
- 4. Security policy & NAT rule review
- 5. Security profiles & threat prevention
- 6. SSL/TLS decryption review
- 7. GlobalProtect & IPsec VPN security
- 8. Zone protection & exposed services
- 9. Logging, HA, backup & Panorama
- 10. Sample report
- 11. Palo Alto firewall security checklist
- 12. Pricing
- 13. How to audit a Palo Alto firewall
Palo Alto Networks, PAN-OS, Panorama, GlobalProtect, Prisma, Strata, WildFire, App-ID and User-ID are trademarks or registered trademarks of Palo Alto Networks, Inc. OC Security Audit is an independent assessment firm and is not affiliated with, sponsored by or endorsed by Palo Alto Networks. All sample companies, firewalls and findings shown on this page are fictional and used for illustration only. The assessment is read-only: no configuration changes, commits or active tests are performed.

Guided by Ali Hassani, CISO
Certified CISO (C|CISO) and CISSP with 25+ years in IT, cybersecurity, compliance and infrastructure, and dozens of Microsoft and Cisco certifications, including MCSE, MCITP, MCSA Security, CCNP and CCNA. Every Palo Alto audit is read-only, evidence-based and written so an owner and a firewall administrator can both act on it.
Questions IT leaders ask
Should the management interface ever be reachable from the internet?
No. Palo Alto Networks recommends restricting management access to trusted internal IP addresses. Remote administrators can connect through GlobalProtect to a jump host on the admin network instead.
Do you need our administrator passwords?
No. You create a separate Superuser (read-only) account for the audit. We never sign in with your administrator accounts and never ask for their passwords.
Does a read-only account create a risk?
It can read the whole configuration, so treat it like any privileged account: give it a strong, unique password and disable it the day the collection ends.
Do you review Panorama too?
Yes. If Panorama manages your firewalls, we review its administrators and management access as well, and read the firewalls’ settings through it.
Will anyone notice the audit?
End users should not notice anything. Your firewall administrators and your SIEM will see logins by the audit account in the System log. We tell your IT or security contact the date, time, account and computer in advance.
Optional implementation help
OC Security Audit only audits, read-only. If you want hands-on help, IT Perfection, a managed IT business also owned by Ali Hassani, can implement the fixes and support ongoing firewall and VPN management. Using it is optional.

Know what your firewall really allows, before an attacker tests it
Schedule a consultation. We scope the Palo Alto firewall audit in 30 minutes and quote one fixed price.
Read-only audit. No changes to your firewalls. Irvine, Orange County and Southern California on-site; remote nationwide.


