The 7 critical checks
If you only check a few things this quarter, check these. Each one is a short path from the internet to your Firebox or your network.

| ID | Check | Severity |
|---|---|---|
| MG-01 | Fireware Web UI (TCP 8080) or WatchGuard System Manager ports (4105, 4117, 4118) reachable from Any-External | Critical |
| MG-02 | Default passphrase still set on the built-in admin or status account | Critical |
| FW-01 | Fireware OS version affected by a vulnerability on CISA’s Known Exploited Vulnerabilities list | Critical |
| FW-02 | Fireware OS 11.x, or a Firebox model past end of life | Critical |
| VP-01 | Mobile VPN (IKEv2, SSL, L2TP or IPSec) sign-in without MFA | Critical |
| VP-02 | IKEv2 Mobile VPN or a branch office VPN with a dynamic gateway peer on a Fireware release affected by CVE-2025-9242 or CVE-2025-14733 | Critical |
| PO-01 | Policies or SNAT exposing RDP, SMB, SSH, database or camera ports to the internet | Critical |
All 42 checks by area
Default severity shown. In the audit, severity reflects your setup. Each area links to the page that explains the checks.
Mobile VPN & branch office VPN
| ID | Check | Severity |
|---|---|---|
| VP-01 | Mobile VPN (IKEv2, SSL, L2TP or IPSec) sign-in without MFA | Critical |
| VP-02 | IKEv2 Mobile VPN or a branch office VPN with a dynamic gateway peer on a Fireware release affected by CVE-2025-9242 or CVE-2025-14733 | Critical |
| VP-03 | IKEv2 configuration deleted, but a branch office VPN to a static peer still configured on an affected release | High |
| VP-04 | Built-in VPN policies accept IKE traffic from any address when only known peers need it | High |
| VP-05 | Mobile VPN users can reach all internal networks | High |
| VP-06 | Former-employee, test or shared accounts still allowed to connect | High |
| VP-07 | Unused VPN types left enabled | Medium |
| VP-08 | Weak IKE or IPSec settings in branch office tunnels | Medium |
Management access & users
| ID | Check | Severity |
|---|---|---|
| MG-01 | Fireware Web UI (TCP 8080) or WatchGuard System Manager ports (4105, 4117, 4118) reachable from Any-External | Critical |
| MG-02 | Default passphrase still set on the built-in admin or status account | Critical |
| MG-03 | Management not limited to an alias of admin networks or addresses | High |
| MG-04 | Device Management users sign in without MFA | High |
| MG-05 | Everyone signs in as the built-in admin account | Medium |
| MG-06 | Account Lockout for Device Management users not enabled | Medium |
| MG-07 | Support access account left enabled when no support case is open | Medium |
| MG-08 | SNMP v1 or v2c enabled with a default or guessable community string | Medium |
Fireware OS lifecycle
| ID | Check | Severity |
|---|---|---|
| FW-01 | Fireware OS version affected by a vulnerability on CISA’s Known Exploited Vulnerabilities list | Critical |
| FW-02 | Fireware OS 11.x, or a Firebox model past end of life | Critical |
| FW-03 | Fireware not on the latest release of its branch | High |
| FW-04 | A Firebox that ran a vulnerable IKEv2 release, with locally stored secrets not rotated since | High |
| FW-05 | Support or security subscriptions expired | High |
| FW-06 | No written upgrade process or change window | Medium |
Logging, backups & WatchGuard Cloud
| ID | Check | Severity |
|---|---|---|
| LG-01 | Logs not sent to WatchGuard Cloud, Dimension or a SIEM | High |
| LG-02 | WatchGuard Cloud or WatchGuard portal accounts without MFA, or shared | High |
| LG-03 | No recent backup image or saved configuration file stored securely off the Firebox | Medium |
| LG-04 | No notifications for admin sign-ins, configuration changes or VPN failures | Medium |
| LG-05 | FireCluster out of sync, or failover never tested | Medium |
| LG-06 | Time not synchronized with NTP | Low |
Firewall policies
| ID | Check | Severity |
|---|---|---|
| PO-01 | Policies or SNAT exposing RDP, SMB, SSH, database or camera ports to the internet | Critical |
| PO-02 | Policies from Any-External to internal networks with Any as the port | High |
| PO-03 | Trusted, optional, guest and device networks can all reach each other | High |
| PO-04 | Outgoing traffic allowed with a packet filter only, so no subscription service sees it | Medium |
| PO-05 | Packet filters used for HTTP, HTTPS or DNS where a proxy is needed for inspection | Medium |
| PO-06 | Disabled policies, duplicates and policies with no traffic in 90 days | Low |
| PO-07 | Policies with no description, owner or ticket reference | Low |
Subscription services
| ID | Check | Severity |
|---|---|---|
| SS-01 | Gateway AntiVirus and Intrusion Prevention not enabled on the policies in use | High |
| SS-02 | Signature updates not automatic, or the last update is old | High |
| SS-03 | APT Blocker not enabled for downloads | Medium |
| SS-04 | HTTPS content inspection off for general web traffic | Medium |
| SS-05 | WebBlocker not blocking malware, phishing and newly registered domains | Medium |
| SS-06 | Botnet Detection and Geolocation not enabled | Medium |
| SS-07 | Reputation Enabled Defense and DNSWatch not used where licensed | Low |
Pass, Fail, Warning, Manual review
Pass
The setting meets the check, with the evidence recorded.
Fail
The setting does not meet the check. The finding gives the risk and the exact fix.
Warning
Partly met, or met in a way that needs a decision from you, such as an exception that should be documented.
Manual review
The answer depends on your business, such as whether a rule is still needed. Ali reviews it with your administrator.
Page 6 of 8: WatchGuard Firebox security checklist
- 1. WatchGuard Firebox Security Audit (hub)
- 2. Mobile VPN & branch office VPN review
- 3. Management access & Fireware lifecycle
- 4. Firewall policies & subscription services
- 5. Sample report
- 6. WatchGuard Firebox security checklist (this page)
- 7. Pricing
- 8. How to audit a WatchGuard Firebox
WatchGuard, Firebox, Fireware, AuthPoint, Dimension and WatchGuard Cloud are trademarks or registered trademarks of WatchGuard Technologies, Inc. OC Security Audit is an independent assessment firm and is not affiliated with, sponsored by or endorsed by WatchGuard. All sample companies, Fireboxes and findings shown on this page are fictional and used for illustration only. The assessment is read-only: no configuration changes or active tests are performed.

Led by Ali Hassani, CISO
A checklist tells you what to look at. The audit tells you what it means for your business: Ali scores every check with evidence and turns the results into a roadmap.
- Certified CISO (C|CISO) and CISSP
- 25+ years in IT, networking and cybersecurity
- Microsoft and Cisco certifications, including CCNP, CCNA, MCSE, MCITP and MCSA Security
- Headquarters in Irvine; on-site across Southern California; remote audits nationwide
Questions IT leaders ask
Can we use this checklist ourselves?
Yes. The checks and the how-to guide are written so an administrator can review a Firebox on their own. The audit adds evidence, scoring, risk ranking and a roadmap.
Does it apply to cloud-managed Fireboxes?
Yes. Menu names differ between Fireware Web UI and WatchGuard Cloud, but the checks are the same.
How often should we review our Fireboxes?
At least once a year, and after any major change such as a new office, a Fireware upgrade or a change of IT provider.

Want every check scored with evidence?
Schedule a consultation. The WatchGuard audit is a fixed $3,500 for any number of Fireboxes.
Read-only audit. Fixed price $3,500. Irvine, Orange County and Southern California on-site; remote nationwide.


